Ant Brain Drones
CAM 02 // Top
Status: in active development
Test flights // December 2026
High-speed electric quadcopter // In development
Vector.01
Designed for over 200 mph, a 25,000 ft ceiling and a 4.5 lb payload bay, in a 10 lb airframe that packs into a field case and flies beyond line of sight.
Status: in active development
Test flights are scheduled for December 2026. VECTOR.01 isn't available for delivery yet, and the specs on this page are design targets until flight testing confirms them.
$3,999 / unit · Early-access pricing · 5-unit minimum
200+ MPHTarget top speed
25,000 FTTarget ceiling
4.5 LBTarget payload
BLOSBeyond line of sight
Design targets
Target performance
To be confirmed in December 2026 flight tests
Top speed
200+MPH
Service ceiling
25KFT
Payload capacity
4.5LB
Airframe weight
~10LB
Motors
4QUAD
Range
BLOS
Flight modes
Flown by hand or by its own brain
VECTOR.01 is an electric tandem-wing quadcopter that works with a pilot or on its own. It takes off level and steady, then switches to rate mode for full agility once it's up to speed. Everything packs into a single field case, and the long-range radio link keeps you connected well past what you can see.
Airframe
Every angle
5 views // Studio renders
CAM 01 // 3-4 viewCAM 02 // Top
CAM 03 // Nose
CAM 04 // Rear
CAM 05 // MotorSystems
What's on board
Payload bay
SYS-A- Modular canister, 160 mm × 60 mm
- Carries up to 4.5 lb of sensors, cameras or cargo
- Quick-release mount for fast payload swaps
- Configure it per job without changing the airframe
Control and link
SYS-B- ExpressLRS long-range radio for beyond-line-of-sight flight
- Long-range video transmission streams a live feed to your goggles and tablet
- Includes antennas for the drone and ground station
- FPV goggles with a built-in heads-up display
- Dedicated controller with precision inputs
- Long-range onboard camera
Autonomy levels
SYS-C- Base: manual flight with stabilization assist
- Enhanced: FLIR thermal imaging with subject tracking
- Advanced: onboard computer for fully autonomous flight
- Automated tracking
- Pick the level that fits your budget
Built for the field
SYS-D- Packs into one case with a configurable payload
- Quick-charge system for short turnarounds between flights
- Electric drive that's simple to service on site
- Modular build you can tailor to the job and budget
Ground control
Plan and fly from a tablet
The ground control app puts the whole flight on one screen.
- Tap-to-fly waypoints
- Drop a point on the map and get the route and arrival countdown instantly.
- Live telemetry
- Altitude, speed, battery and GPS position, with the flight path drawn as you go.
- Encrypted link
- Encrypted command and control, with one-touch abort and return-to-home.
- Made for outdoor use
- A clear, simple interface that's quick to set up on site.
Flight envelope
High speed aerial maneuvering and kinetic flight
Early access
Reserve your units
VECTOR.01 is in active development, with test flights scheduled for December 2026. It isn't available for delivery yet. Businesses, government agencies and research organizations can request early access now, with a minimum order of 5 units.
We'll keep you updated through testing and confirm final specs, pricing and delivery dates once flight testing is complete.
$3,999Per unit // Early-access pricing
5-unit minimum order$19,995
Each unit is planned to include
- VECTOR.01 airframe with modular payload bay
- ExpressLRS long-range radio and controller
- FPV goggles with heads-up display
- Long-range camera and video transmission system
- Antenna set for the drone and ground station
- Ground control tablet app
- Quick-charge system and field case
Not yet available for delivery. Delivery dates are set after December 2026 flight testing.
In active development // Test flights December 2026
Get early access to VECTOR.01
Tell us about your organization and the job. We'll keep you updated on flight testing and confirm specs, pricing and delivery dates when they're set. Minimum order 5 units.
Chat on WhatsAppOr email sales@antbraindrones.com